Advanced reference

Krea2 Edit Technical Guide

This page collects the model, tuning, and local-workflow details behind the browser editor. It is written for users who want pinned weights, repeatable settings, lower-VRAM variants, or a local ComfyUI graph.

Model weight and version guidance

Prefer v1.2 when it is available. It is the recommended build on the model card and adds reference sheets, swaps, inpainting, outpainting, virtual try-on, and FIT geometry. Confirm the version pinned by the hosted Space before comparing results across sessions.

Recommended file

krea2_identity_edit_v1_2.safetensors

Krea2 Edit 결과를 변경하는 설정

Treat these values as starting points from the public model card and node changelog, not universal guarantees. Change one control at a time and compare against the source image.

직무 유형검문소단계CFG
추가 / 색상 변경 / 스타일 변경 / 스테이지 변경Krea 2 Turbo8–121.0
제거/대량 삭제Krea 2 Raw~203.0
  • ref_boost ≈ 4 — v1.2 노드의 강력한 유사성 시작점; ~10 이상에서는 제거가 중단되기 시작합니다. 1 미만이면 창의력이 느슨해집니다.
  • grounding_px — lower는 편집 내용을 더 균일하게 따릅니다. 높을수록 신원이 보호됩니다. 중복된 "분할 사진" 프레임은 일반적으로 값이 훈련된 범위보다 훨씬 높다는 것을 의미합니다(v1.1 문서에서는 384-768을 컴포트 밴드로 인용).
  • LoRA strength 1.0 — 게시된 기본값입니다. 1 이상의 CFG에서는 빈 프롬프트와 동일한 이미지로 네거티브를 접지합니다.
  • 낮은 VRAM SVD는 v1.2( r128 ~ 0.91 GB, r64 ~ 0.46 GB) 카드당 무게 에너지의 99% 이상을 유지합니다. 브라우저 Krea2 Edit를 노트북 GPU로 남겨둘 때 유용합니다.

브라우저 Krea2 Edit 대 로컬 ComfyUI

The hosted editor is best for quick prompt tests. A local graph is better when you need exact versions, repeatable seeds, batches, private infrastructure, or additional LoRAs.

호스팅된 Space(이 페이지)

  • 체크포인트 다운로드가 없습니다. 몇 분 안에 Krea2 Edit를 사용해 보세요
  • Krea2 Edit에 대한 신속한 R&D 및 클라이언트 데모에 적합합니다.
  • Space 가동 시간 및 공유 GPU 대기열에 따라 다름
  • 전체 화면 열기: hf.space

로컬 ComfyUI-Krea2Edit

  • 핀 v1.2 가중치 및 FIT / ref_boost 노드 버전
  • 문자, 본문 또는 스타일 LoRA를 맨 위에 쌓으세요.
  • 기본 Krea 2 + Qwen3-VL 인코더 지원이 필요합니다.
  • ComfyUI-Krea2Edit on GitHub

Krea2 Edit의 제한, 라이선스 및 책임 있는 사용

Krea2 Edit의 유사성은 업스트림에서 질감에 충실하고 비율을 보존하는 것으로 설명됩니다. 피부와 조명은 종종 잘 전달되는 반면 매우 특이한 얼굴 기하학은 가까운 친척처럼 읽을 수 있습니다. 의상 교환은 실패하거나 실패합니다. 제거에는 Raw 레시피가 필요하며 여전히 때때로 실패합니다. 극단적인 머리카락이나 신체 유형에는 상단에 제목 LoRA가 필요할 수 있습니다.

가중치는 파생 모델입니다. Krea 2 Community License. 게시된 수익 기준(모델 카드 요약: 연간 100만 달러 미만)에서 상업적 사용이 허용됩니다. 그 이상의 기업용 약관은 Krea에 문의하세요. 배포에서는 콘텐츠를 조정해야 합니다. AI 공개가 적용될 수 있습니다. LoRA는 SFW 교육을 받았습니다. 실제 사람과 합의되지 않거나 유해한 유사성을 생성하지 마십시오. 우리의 글을 읽어보세요 개인 정보 보호 정책 서비스 약관.

Technical sources

Check the upstream model card and repositories for current files, workflows, changelogs, licenses, and compatibility notes.

FAQ

Technical FAQ

Version and local-workflow answers for advanced users.

Which model weight should I use?

Prefer v1.2 (krea2_identity_edit_v1_2.safetensors) when available, and confirm the exact version pinned by the hosted Space before comparing sessions.

What do I need for a local workflow?

Use ComfyUI with native Krea 2 and Qwen3-VL support, install the ComfyUI-Krea2Edit node pack, load the LoRA, and start from a workflow shipped by the project.

What settings should I start with?

For common additions, recolors, restyles, and restages, start with the Turbo recipe at 8–12 steps and CFG 1.0. For large removals, try the Raw recipe near 20 steps and CFG 3.0.